Empire Home Solutions installs vinyl siding across Greater Cincinnati — the most popular exterior choice for good reason: rust-proof, low-maintenance, and available in more profiles and colors than any other siding. But here’s the detail that decides whether vinyl lasts: it must be hung with room to move. Vinyl expands and contracts significantly across Ohio’s freeze-thaw range, so each panel has to be nailed loosely enough to slide, never pinned tight. Because panels fastened too snug buckle in the first hot summer, that hanging technique is exactly where we’re careful. As a result, every vinyl siding installation lies flat for decades and carries our lifetime craftsmanship warranty.
By Chris Kestel, Founder & Owner · Last Updated August 2026
A+ BBB Accredited · Correct Expansion Fastening · Lifetime Craftsmanship Warranty
A+ Rated · Fully Insured & Bonded · Lifetime Warranty
Vinyl is the most-installed siding in the country, and the reasons hold up in Ohio. Here’s why homeowners pick it.
Comparing vinyl against fiber cement, cedar, or engineered wood? See our page for the full material comparison.
We build every vinyl re-side around correct fastening and the wall behind it. Here is how it works.
1. Inspection & Measurement
First, we assess the existing exterior, flag likely trouble walls, and measure for an accurate quote.
2. Profile & Color Selection
Next, you choose the profile and color, and whether to add an insulated backer. We show real samples in your own light.
3. Tear-Off & Sheathing Check
Then we remove the old siding and repair any rotted sheathing before new material goes up. Because vinyl only looks as good as the wall beneath it, this step matters.
4. House Wrap & Expansion Fastening
After that, we install house wrap, then hang the vinyl nailed loosely enough to move with temperature. Consequently, the panels never buckle in summer heat.
5. Trim, Cleanup & Walkthrough
Finally, we finish corners, J-channel, and trim, haul off the old material, and walk the exterior with you.
We install standard vinyl and, for older leaky walls, insulated vinyl siding with a foam backer. Because the backer adds rigidity and R-value, our vinyl siding insulation installation reduces drafts and resists impact denting better than hollow panels.
Beyond standard horizontal lap, our vertical vinyl siding installation and board-and-batten vinyl create a modern-farmhouse or accent look. Therefore, you can mix profiles — board-and-batten on gables, lap on the body — for real curb appeal.
Our vinyl shake siding installation delivers the look of cedar shakes without the upkeep. As a result, you get that texture on gables and accent walls with none of wood’s sealing schedule.
The detail work separates a clean vinyl job from a sloppy one. We handle installing vinyl siding corners, trim, and vinyl siding soffit installation so every transition looks finished, not cobbled.
In the right conditions, we install vinyl over sound existing surfaces. Our installing-vinyl-siding-over-wood-siding and over-lap or aluminum work avoids a full tear-off when the substrate allows. However, we inspect first, since vinyl over a failing or uneven wall only telegraphs the problem.
Finally, we side sheds, garages, and outbuildings to match your home, so the whole property reads as one.
Vinyl siding installation cost depends on home size, profile, and whether you add insulation. Vinyl is consistently the most economical full-house siding per square foot, which is the core of its appeal. The cost to get vinyl siding installed rises with insulated backing, premium profiles like board-and-batten or shake, rotted sheathing found during tear-off, and extensive trim detailing. Rather than a per-square guess, we measure on-site and itemize the material, tear-off, house wrap, trim, and labor in a written quote. For a broader look at how vinyl compares to other materials on price and lifespan, see our page.
Your home and our crew stay protected throughout.
Corners, J-channel, and soffit finished properly, where sloppy crews cut corners.
Lap, vertical, board-and-batten, and shake, plus insulated options.
Our workmanship is covered for life, on top of the panel warranty.
We repair rotted sheathing behind old siding before new vinyl goes up, not over hidden problems.
We nail vinyl to move with temperature, the single biggest factor in whether it buckles or lies flat for decades.
We install vinyl siding throughout Cincinnati, Norwood, Oakley, Pleasant Ridge, Hyde Park, Loveland, and Milford, plus the surrounding Hamilton and Clermont County communities. Because much of the area’s housing predates modern siding, our tear-off and sheathing experience matters more here than a crew that only hangs new construction.
Vinyl is the most economical full-house siding per square foot. The total depends on home size, profile, insulated backing, and any sheathing repair found during tear-off. Premium profiles like board-and-batten and shake cost more than standard lap. You get an itemized written quote after an on-site measure.
Often, on older, leakier homes. Insulated vinyl adds an R-value backer that reduces drafts, adds rigidity so panels resist denting, and gives a flatter, more premium look. On a newer, well-insulated home the energy gain is smaller, so we give an honest recommendation based on your walls.
Sometimes. If the existing wall is sound, flat, and dry, vinyl can go over wood, lap, or aluminum siding. But if the substrate is rotted, uneven, or hiding moisture, vinyl over it only telegraphs the problem. We inspect and tell you honestly whether a tear-off is the better call.
Only if it’s installed wrong. Vinyl expands and contracts with temperature, so it must be nailed loosely enough to move. Panels pinned too tight buckle in the first hot summer — the most common vinyl failure, and exactly the mistake correct fastening prevents.
Standard horizontal lap, Dutch lap, vertical, board-and-batten, and cedar-shake looks, in dozens of colors. Many homeowners mix profiles — board-and-batten or shake on gables and accents, lap on the main body — for added character.
Quality vinyl, correctly installed, lasts 30-plus years in Ohio and carries strong manufacturer warranties. It won’t rot, rust, or need repainting; occasional rinsing is the only maintenance.
Vinyl is the easiest siding to live with and, unfortunately, one of the easiest to install badly — the buckled, wavy walls you’ve seen are almost always panels nailed too tight. We hang it to move with the seasons, finish the trim cleanly, and back it for life.
Call (513) 773-1567 for a free vinyl siding estimate, or send your details online and we’ll schedule a site visit.